Before & After Gallery - Fernbrook Garage Doors Riverside

Garage Door Before & After in Riverside, CA

We could tell you we do clean work, but showing you is better. On this page you’ll see a few of the transformations our Riverside team has handled, from tired tension springs to doors that hadn’t opened smoothly in years. Every job here is the kind of work we do any given week. The photos change as we complete new projects, so check back when you’re weighing your own repair or replacement.

Call (559) 254-0605

Recent Transformations

Broken Torsion Spring on a Woodberry Park Two-Car Door

BeforeAfter

The homeowner called because the door stopped halfway up and made a sound like a dropped toolbox. The torsion spring had separated clean through, which is typical for springs in Riverside after years of summer heat cycling. We replaced both springs as a matched set, wiped down the shaft, and rebalanced the door. When we left, the door lifted with two fingers and closed without shaking the track.

Safety note: torsion springs are wound under tension strong enough to cause serious injury. This is a job for a trained technician with the right winding bars, not a weekend fix.

Steel Door Replacement on a Wood Streets Home

BeforeAfter

The old door had a rusted bottom panel from years of sprinkler overspray and a dent in the second panel where a bike pedal had met it one too many times. Rather than piecemeal the panels, the family chose a full replacement. We measured the opening, ordered the door, and had it installed the following week, including new perimeter weather seal. The garage stayed noticeably cooler through the next summer, and the door was balanced from day one.

Opener Swap to a Belt-Drive LiftMaster in Canyon Crest

BeforeAfter

The opener worked, but it growled. The chain had stretched, the rail was out of level, and the nylon gear inside the motor head was shedding teeth. We swapped the whole unit for a belt-drive LiftMaster and adjusted the force settings so the door doesn’t fight the track. The family has a bedroom above the garage, and the change in noise was the first thing they mentioned when we followed up.

Off-Track Door with Bent Rollers in La Sierra

A delivery truck clipped the door while backing out, pulling the lower left off the track and folding one roller. We straightened the track bracket, replaced the damaged rollers, and checked the full door for hidden stress, including the hinges and spring tension. The door now runs the full height without a hitch. It’s simpler work than it sounds, but it has to be done in order, or the door chews through the next set of rollers.

Frozen Door Fixed with Steel-Backed Cable Replacement in Orangecrest

The door wouldn’t move because one cable had begun to fray and the other had popped off the drum. When a cable fails, the door usually binds against one side of the track, which is what happened here. We replaced both cables, reset the drums, and checked the spring tension before testing the door a few times. The door now runs square, and the homeowner had no idea it could be that quiet.

Want Results Like These?

If your garage door is loud, stuck, loose, or just worn out, call Fernbrook Garage Doors Riverside at (559) 254-0605. You’ll get a written price before any work begins, a live person on the phone any hour of the day, and a crew that treats your home like it’s our own. We’ll show you exactly what’s wrong, what we’ll do, and what it costs, before we touch a single bolt.

Written by Jesse Calder, Owner at Fernbrook Garage Doors Riverside, serving Riverside and the surrounding neighborhoods since 2002.